Where is Audrey?

As you read this I am on a plane to South America. Chile specifically, to visit my oldest son who has been living and working in the capital city of Santiago for the past 10 month. Chile is long and narrow country.  It is  2,653 mi long, with an average width 109 mi. Comparatively, the area is slightly smaller than twice the size of the state of Montana. It will be the height of summer during our visit and we will be visiting urban and rural locations in the central part of the country, the  desert in the north, as well as a subtropical  offshore  island. 

There is so much travel info online. I have learned about packing cubes – rectangular nylon bags that help you save space when packing,  tips to avoid getting sick when choosing and eating at street vendors, travel clothing with  hidden pockets,  easy care and quick drying garments with anti-odor properties that allow longer wear periods between washing, ways to go ( to the bathroom ) in different countries.  It is amazing.

My on line reading influenced the planning and sewing  of my travel wardrobe.   My wardrobe will be loose tunic type tops worn over camisoles and tanks, with jeggings  or pants,  and comfortable shoes . For the most part the temp will be 60's to 80’s with minimal rain.  However the night temps in the desert are near freezing and we have one desert excursion planned that starts at 4 AM. I will travel from VA, which is cold in Dec, in light layers which I can use on desert night excursions.

Secret Pockets and Reversible Garments.

When I travel outside the US, I am always a bit paranoid about losing my passport or being pick pocketed. It doesn’t matter what country. So I put “secret” pockets in the front of pants, inside the front of coats and in other garments, where I can carry my passport, charge cards and ID close to my body. I made a bunch of secret pockets out of muslin and poly/cotton scraps. These are the type you sew into the inside front of pants by attaching them to the waistband facing. 

Sew in secret pockets

For knit tops I like to insert the  pocket in the side seam with an invisible zipper. I specifically looked for light weight invisible zippers that have mesh tapes instead of the regular weight tapes.  I believe these zippers are for use on lighter weight fabrics that would be weighed down by a standard invisible zipper. They are very hard to find and in limited colors. The difference is the zipper tapes are made of a lighter weight polyester mesh  versus the typical polyester twill weave.  The pocket itself is made out of skin colored knit to avoid see through.

Zipper tape types

Secret Pocket on Tank Top

I noticed my recent sewing projects all had a  bit or a challenge or  puzzle in the construction.  Sewing for this trip was no exception.  Reversible garments.  The first is the Style Arc Courtney top with different front panels.  A silk Asian print in purples and grays for side one and a rose and gray colored floral silk stripe on side two, with the rest of the top constructed of gray rayon spandex knit.  All fabrics from Denverfabrics.com.

And reversible knee length shorts. Fabric used was a stretch denim woven with black and white fibers resulting in black tweedy color on one side and white on the reverse.  Pattern is an old RTW (Sears I think) I took apart and used for a pattern. The fabric is from Fabric.com. I had been planning to make reversible pants from this fabric for a while.

All seams are flat felled to the black side. On the white side this looks like ¼ inch top stitching. The waist on the black side is black elastic, used both as an accent and also to prevent the stretch out that stretch denim does after wearing a short time.  I needed the waist to stay snug and elastic was the solution. While trimming the seam allowance for felling, I accidentally trimmed both seams allowances in the center front area.  Expletive hail storm!

Solution: a faux zipper placket.  Looks great on both sides.

  The leg edges on the black side are hemmed using a faced piece about the same width of a typical sewn jean hem.

The secret pocket for these pants is on twill tape  tabs inserted between the elastic and the waist edge.  No matter which side I am wearing out, I  can flip the packet to the inside.

Secret Pocket on reversible pants

The other item I sewed for my travels is a cross body bag with water bottle compartment
The pattern is Cross-Body Hipster Bag with Water & Phone, sold by Lidija Miklavcic on Craftsy.

Cross-Body Hipster Bag 

It is a clever design for a medium size bag cross body bag which rides on your front, with separate compartments for your phone and water bottle. The front shoulder strap is designed to enclose your earphone wires, and position the ear pieces near your ears. It is a well drafted pattern with very good instructions.  It is still a bit of a challenge to sew.  Mine is sewn from gray leather from www.theleatherguy.org.  The lining is dark red nylon, backed with vinyl, scraps from a raincoat project in my UFO pile. I added some extra pockets inside the front strap, and finished the lining in a different way that the directions recommended.  My Galaxy 7 phone is too large for the pocket. The flap cannot close.  Next time I make it I will make the phone pocket larger.

Estoy listo para irme.

Zip-a-dee-doo-dah - Burda 6637 Jacket

The weather has finally  cooled down and I actually feel like sewing winter clothes.  A recent  impulse fabric buy was a beautiful pink, purple, grey ombre brushed wool from Emmaonesock.com.  When an  online fabric vendor implements PayPay, as Emma One Sock did recently,  it become dangerous for me. Pay Pal eliminates the need for me to enter credit card info, which is when I ask myself, Do I really need this? (For fabric the answer is always No! ) Shortly after the fabric arrived, I saw this picture in my inspiration file.

And I just happened to have Burda Jacket pattern 6637 and some coordinating separating zippers in my stash.

The pattern description reads “ Both jackets have a slightly higher waist and easily lend a chic touch to any outfit. Although your favorite knit cardigan is great for a casual look, some occasions may call for a bit more elegance. Choose the jacket which suits your style and best flatters your figure.”

The inspiration jacket has a deep V  to the waist and a cutaway starting at the waist and  extending to the hem. The Burda pattern has a shorter V neck. I felt that the pattern was better for a convertible jacket, especially the cropped version because it would have small section of vertical front edge to use hooks and eyes to hold closed if desired.

Design Decisions I had to make.

1. Waist Seam Zipper – trim or functional – I decided to go with  a functional zipper so that bottom of the jacket could  removed.

2.  Zipper tape exposed or not – This decision determined the method of zipper application/ insertion and whether waistline seam allowance was needed. Exposed – could cut off seam allowance.  Non exposed, seam allowance needed  as zipper is inserted between lining and outer fabric.

3. Lining   -  Pattern is for unlined jacket.  I would have to draft a lining pattern.  The decision was Yes, a lining was definitely needed because the back of the wool flannel would catch on any garments worn underneath.

Additional changes for my body  - lengthening the back and shortening the front to get a horizontal waistline. Getting old is hell! Alterations for square, forward, narrow shoulders. This pattern has very wide shoulders. I removed about 1/2 inch in width.  I should have removed more. There is some extra fabric between the front armhole and the bust that bugs me.  It shows on the models on the pattern front too.

The fabric had two repeats of the ombre coloring just the right length to make it easy to cut and  match the colors across the jacket.

I ended up lining both the top and peplum to the edge of the waist seam even though I sewed the zipper tape to the outside of the fabric.  I reasoned that if I ever got tired of the zipper, I could remove it and sew the seam as designed.

I used two separating zippers. The separating ends were butted up to each other at center back.  Each zipper closed as it went from back to front.  In the front where the zipper extended past the front edge, I removed about 4 teeth on each side with wire cutter pliers.   I  removed the metal stops at the end of the zipper with the pliers and relocated them to the tape where the teeth ended at center front. I cut off the excess zipper tape at the end of the section where I removed the teeth, and turned it under.

Zipper Modifications

Zipper Modification Tools

I hand basted the closed zipper to the jacket top and peplum, making sure center back, side seams and darts lined up vertically. I top stitched the zipper in place near the zipper teeth and again near the outer edge of the zipper tape.

Back Zipper

Front Zipper

Photographing  sewn garments is  difficult in the winter. It is dark when I leave for work and dark when I get home, so weekends are the best time for outdoor photography.  But my idea of an ideal  winter weekend  is one where I do not have to leave the house. Comfortable clothes, no makeup, sewing, reading etc. I swear I have a hibernation mode. The only reason there are photos of the jacket on me is that DH, DS2 and I had to go to a nearby drugstore and get our Hepatitis A and Typhoid immunizations for an upcoming trip.   If I was going to get dressed for shots, it might as well be in my new jacket.

.

Cropped